英文字典中文字典


英文字典中文字典51ZiDian.com



中文字典辞典   英文字典 a   b   c   d   e   f   g   h   i   j   k   l   m   n   o   p   q   r   s   t   u   v   w   x   y   z       







请输入英文单字，中文词皆可：


请选择你想看的字典辞典：
单词字典翻译
labrea查看　labrea　在百度字典中的解释百度英翻中〔查看〕
labrea查看　labrea　在Google字典中的解释Google英翻中〔查看〕
labrea查看　labrea　在Yahoo字典中的解释Yahoo英翻中〔查看〕

安装中文字典英文字典查询工具!


中文字典英文字典工具:
选择颜色:
输入中英文单字

































































英文字典中文字典相关资料:


  • Silverface Pro Reverb? - The Steel Guitar Forum
    The original 40-watt non-ultralinear Pro Reverb sweetens up quite a bit earlier than the comparable-period 85-watt Twin Reverb, but the later ultralinear Pro Reverb is almost as loud-and-clean as a blackface Twin Reverb Heavier than the original Pro too, due to bigger iron
  • Tonemaster twin died- during gig - The Steel Guitar Forum
    I'm currently at a gig and my tonemaster twin just died Jewel light is out snd red light in the back underside is flashing It has power as reverb tremolo pedal still light up Have changed plugs, unplugged, changed cords Still dead Can't find a fuse in the manual Hoping there's a quick way to reboot but can't figure it out Have loved and used this amp for many many gigs First problem
  • Reverb and Delay effects - The Steel Guitar Forum
    Over the years I initially used the analog spring reverb as provided in Peavey and Evans amplifiers, then later added the Boss DD3 digital delay pedal, much later I went with a Profex2 for reverb delay and currently use the Lexicon MPX1 for both effects
  • FX Loop trick for Fenders (Deluxe, Twin) without loops?
    I was in a music store trying a DRRI and a friend showed me a trick for mixing the two channels Intrument -> left input #1 Left input #2 -> right input #1 Then mix the two channels with the volume controls This works well for mixing the reverb regardless of the reverb intensity My question is, can this be used as an effects loop? example: Intrument -> left input #1 Left input #2 -> delay
  • Nashville 112 Reverb Problem SOLVED **OK To Close**
    If one isn't making good contact that could cause the problem There hasn't been any problem with the new style reverb cable connection to the motherboard in the NV112 or NV1000, but you can also check and reseat that connection Barring a connection problem, either a defective reverb pan or an internal electronic problem
  • Twin Reverb Impedance question - The Steel Guitar Forum
    The mid and late period Fender tube amps are very robust I've run both my Twin Reverb and my Super Twin Reverb amps at 2 ohms for extended periods with absolutely no ill effects I believe that on most amps with an "extension speaker" jack, it's quite safe to run an extension speaker unless the extension speaker is of a lower impedance than the built-in speaker (s) (Otherwise, there's be
  • Fender Twin Reverb Settings? - The Steel Guitar Forum
    Reverb on 3 All the Black Face Fender amps are voiced with the mid's scooped out quite a bit so I do turn up the mid range control Also on all "Black Face" Fender amps, the higher you can run the all the tone controls, the more volume you'll get out of the amp
  • Twin Reverb pops when switching on the vibrato
    My Twin Reverb makes a loud pop whenever I switch on the vibrato using the amp's footswitch My TR's footswitch has the 1 4" jack, rather than the RCA jacks Any ideas on how to fix this problem?
  • Accutronics reverb tank repairs - The Steel Guitar Forum
    Reverb tank repair by Larry Hobson » 10 Nov 2021 6:29 pm Randy, Speaking just from me, other than checking for loose connection, forget repairs Replace the unit The small wire in the transformer ,if broken ,seems to be impossible to resolder When I attempted to resolder a broken connection ,wire is so thin it burns up before accepting solder
  • Ext cab with BF Princeton Reverb - The Steel Guitar Forum
    Ext cab with BF Princeton Reverb by John Goux » 4 Dec 2016 12:28 pm I've searched the forum and looked at the long discussions I have a BF Princeton Reverb that sounds great with the steel Jensen C10N I believe PRs are designed for 8ohms I've hooked up different speakers in the extension jack at 8ohms, and like the sound





中文字典-英文字典  2005-2009